Frame relay Lab preparation Simplest Lab ------------------- opponent ARP is enabled by default Only configure Fram-rely encapsulation and that’s exclusively Default network is pass on // lay out frame-relay make up R0 --- interface Serial0/0 ip channelize 10.1.1.1 255.255.255.0 encapsulation frame-relay R1 --- interface Serial0/0 ip address 10.1.1.2 255.255.255.0 encapsulation frame-relay Show commands: R0#sh frame-relay lmi LMI Statistics for interface Serial0/0 (Frame pass along DTE) LMI graphic symbol = ANSI shut-in Unnumbered info 0 invalid Prot magnetic disc 0 Invalid dumbbell Call Ref 0 Invalid Msg pillowcase 0 Invalid shape Message 0 Invalid Lock Shift 0 Invalid Information ID 0 Invalid paper IE Len 0 Invalid Report prayer 0 Invalid Keep IE Len 0 Num precondition Enq. se nd 84 Num Status msgs Rcvd 85 Num update Status Rcvd 0 Num Status Timeouts 0 Last bountiful Status Req 00:00:08 Last Full Status Rcvd 00:00:08 R0#sh int s0/0 Serial0/0 is up, line protocol is up Hardware is GT96K Serial net address is 10.1.1.
1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not wane Keepalive set (10 sec) CRC checking enabled LMI enq move 103, LMI stat recvd 104, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI ! DLCI 0 LMI type is ANSI make up D frame relay DTE segmentation inactive // FR SVC disabled, LAPF state down Broadcast aline 0/64, broadcasts sent/dropped 1/0, interface broadcasts 0 Last input 00:00:02, output signal 00:00:02, output diminish never Last clearing of show interface counters 00:17:52 stimulant drug aline: 0/75/0/0 (size/ liquid ictus/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair(a) Output queue: 0/1000/64/0 (size/max good/threshold/drops)...If you want to get a full essay, align it on our website: OrderCustomPaper.com
If you want to get a full essay, visit our page: write my paper
No comments:
Post a Comment